IBM Books

Nways Manager for AIX-LAN Network Manager/I.H.M.P. User's Guide

Managing FDDI Resources

Partial Table-of-Contents

  • Applications and Agents
  • FDDI SNMP Application
  • FDDI SNMP Proxy Agent

  • Configuring Management Parameters for FDDI Resources
  • Using SMIT to Configure LAN Network Management
  • Configuring General Parameters for SNMP Agents
  • Configuring the IP Address of the Management Station
  • Configuring Agent Community Names
  • Configuring Agent Time-Outs
  • Configuring FDDI SNMP Agents

  • Managing FDDI Networks
  • Understanding the FDDI Application
  • IBM FDDI SNMP Proxy Agent
  • Defining Parameters for FDDI Networks
  • Displaying FDDI Proxy Agent Configuration Information
  • Displaying and Changing the FDDI Segment Resynchronization Interval

  • Managing FDDI Stations
  • Displaying an FDDI Station Submap
  • Displaying SMT Information
  • Displaying the Station Management Profile Window
  • Connecting a Station
  • Disconnecting a Station
  • Testing a Station's Path
  • Running a Self-Test
  • Disabling the A Port of a Station
  • Disabling the B Port of a Station
  • Disabling the M Ports of a Station
  • Using the Station Management Configuration Window
  • Displaying Station Management Fault Window
  • Displaying MAC Information
  • Using the MAC Profile Window
  • MAC Profile Operation Window
  • MAC Profile Capabilities Window
  • Enabling LLC Service
  • Disabling LLC Service
  • Connecting a MAC
  • Disconnecting a MAC
  • Using the MAC Configuration Window
  • Using the MAC Fault Window
  • MAC Fault Error Counters Window
  • MAC Fault Copy Failure Counters Window
  • Using the MAC Performance Window
  • Displaying Port Information
  • Using the Port Profile Window
  • Maintaining a Port
  • Enabling a Port
  • Disabling a Port
  • Starting a Port
  • Stopping a Port
  • Using the Port Configuration Window
  • Using the Port Fault Window
  • Port Fault - Link Errors Push Button
  • Displaying Path Information
  • Using the Path Profile Window
  • Using the Path Configuration Window
  • Using the Path Class Configuration Window
  • Using the Path Fault Window
  • Displaying Attachment Information
  • Using the Attachment Profile Window
  • Using the Attachment Configuration Window

  • Managing FDDI Concentrators
  • Displaying a Concentrator Submap
  • Displaying a Concentrator Profile
  • Saving Concentrator Configuration
  • Performing a Soft Reset
  • Displaying a Cartridge Profile

  • Displaying FDDI Statistics
  • Traps

    • [ Top of Page | Previous Page | Next Page | Table of Contents | Index ]